Panasonic Toughbook CF-F9KWH011M Reference Manual page 194

®
Intel Active Management Technology
<Only for model with Intel
®
Intel AMT offers the operational management function and security function through network.
Setting AMT configuration
1 Turn on the computer, and press
The Setup Utility starts up.
If the password is requested, enter the Supervisor Password.
2 If the Supervisor Password is not set, select the [Security] menu, then set Supervisor
Password.
3 Select the [Security] menu, and select [AMT Configuration], and press
4 Select [Intel(R) AMT] and press
5 Select [Enabled] and press
6 Select [Intel(R) ME Setup Prompt] and press
7 Select [Enabled] and press
8 Press .
Esc
If you do not use the Supervisor Password, clear the Supervisor Password following steps.
Select [Set Supervisor Password], and press Enter.
A
Enter the Current Password, and press Enter.
B
Press Enter when the [Create New Password] display is shown.
C
Press Enter when the [Confirm New Password] display is shown.
D
9 Press .
F10
At the confirmation message, select [Yes] and press Enter.
The computer will restart.
The following procedures are example. It is different according to your environment. Contact your technical support
office.
Press Ctrl + P when [Press <CTRL - P> to enter Intel(R) ME Setup] is shown after the [Panasonic] boot screen
A
disappears.
Press 1.
B
Enter "admin" in [Intel(R) ME Password], and press Enter.
C
Enter the New Password in [Intel(R) ME New Password] to change the password, and press Enter.
D
At confirmation message, enter the password, and press Enter.
Write down new password to remember you password. The password has the limitation (
®
AMT>
F2
Enter
.
Enter
.
Enter
or while [Panasonic] boot screen is displayed.
Del
.
.
Enter
194
.
Enter
page 196).