Panasonic Toughbook CF-F9KWH011M Reference Manual page 83

Writing to CD/DVD
Usage Precautions
When an external CD/DVD drive has been connected
Do not turn the CD/DVD drive power off on this computer when writing to a disc in an external CD/DVD drive. Turning the
power off may result in a malfunction, such as an interruption in the external CD/DVD drive operation.
Windows 7
Using DVD-RAM for Windows 7
Formatting must be executed to write a file to a DVD-RAM. It is possible to write a file to a formatted DVD-RAM in the
same way as writing a file to a floppy disk or hard disk.
Format type
There are six types of DVD-RAM formats, as shown below. We recommend that you choose the format type depending on
the application.
Format
FAT32
UDF1.02
UDF1.50
UDF2.00/2.01
UDF2.5
Feature
This format is supported by Windows 95 (OSR2) / 98 / Me / 2000 / XP / Vista / 7. DVD-RAM
discs in FAT32 format cannot be used on Windows 95 (other than OSR2) / Windows NT.
This format is supported by Windows 98 / Me / 2000 / XP / Vista / 7, and compatible with the
Video mode of DVD-ROM / DVD-R / DVD-RW / +R / +RW.
Standard format for DVD-RAM. Data with large file sizes (video or audio data) can be written at
high speed. We recommend this format when using DVD-RAM for storing data.
This format is used for DVD video recorders conforming to "Video Recording Standards" as
established by the DVD Forum, or for PC recording software conforming to the same standards.
This format is supported by Windows Vista / 7, and is used for Blu-ray recorders or PC
recording software conforming to "Video Recording Standards" as established by the Blu-ray
Disc Association.
This format cannot be used for DVD recorders conforming to "Video Recording Standards" as
established by the DVD Forum, or for PC recording software conforming to the same standards.
83