Midea 60G40ME097-GFT Service Manual
  1. Manuals
  2. Brands
  3. Midea Manuals
  4. Hob
  5. 60G40ME097-GFT
  6. Service manual
Midea 60G40ME097-GFT Service Manual

Midea 60G40ME097-GFT Service Manual

For built-in gas hob
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Model list
60G40ME097-GFT
Warnings:
 This service manual is not available to the general users, but only applies to
professional technicians with relevant qualifications. Any incorrect maintenance may
result in other dangers!
 The power and gas supply must be cut off before maintenance!
 A new power cord which meets the relevant technical requirements must be used
once possible hidden malfunctions are found with the current power cord (refer to
this Manual)!
 Please read carefully all safety warnings in this Manual before maintenance!
 The product is prohibited from using until test is conducted as per relevant
regulations after maintenance!
 This service manual applies to many models, so the specific operations please prevail in
kind!

Table of contents

1.Precaution..............................................................................................3
Precaution.................................................................................3
1.2
Warning..........................................................................................3
2.
Dimension............................................................................................4
3.1.
Features.......................................................................................5
diagram.......................................................................................7
5.Installation..............................................................................................8
Service Manual
For Built-in gas hob
......................................................................5
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 60G40ME097-GFT and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Midea 60G40ME097-GFT

Summary of Contents for Midea 60G40ME097-GFT

  • Page 1: Table Of Contents

    Service Manual For Built-in gas hob Model list 60G40ME097-GFT Warnings:  This service manual is not available to the general users, but only applies to professional technicians with relevant qualifications. Any incorrect maintenance may result in other dangers!  The power and gas supply must be cut off before maintenance! ...

  • Page 2: Precaution

    6.Reassembly and Disassembly…………………………………………………………….9 6.1. Safty precautions…………………………………………………………………..9 6.2. Tools……………………………………………………………………………..9 6.3. Reassembly………………………………………………………………………..9 6.3.1. Reassemble of the Ignition Pin……………………………………………...9 6.3.2. Reassemble of the Thermocouple…………………………………………..10 6.3.3. Reassemble of the Gas Pipe………………………………………………...10 6.3.4 Reassemble of Gas Valves…………………………………………………...10 6.4.Disassembly………………………………………………………….……….……11 6.4.1. Disassemble of the Top Plate…………………………………….….……..….11 6.4.2. Disassemble of the Thermocouple……………………………….…..……….12 6.4.3.

  • Page 3: Safty Precaution

    1.1. Safety Precaution 1. Do not modify this appliance. 2. This appliance should be serviced by an authorized person. 3. All repairs should be done in accordance with the procedures described in this manual. 4. Before you begin, turn off the gas and electricity supply to the appliance. 5.

  • Page 4: Description Of The Appliance

    60G40ME097-GFT Model W (mm) D (mm) H (mm ) 60G40ME097-GFT Note: Dimensions for reference only 3. Description of the appliance 3.1. Features 1. Top-plate 2. Right pan support 3. Knob 4. Auxiliary burner 5. Left pan support 6. Triple-crown burner...

  • Page 5: Electric Diagram

    4. Electric Diagram 60G40ME097-GFT...

  • Page 6: Installation

    5.Installation This appliance is to be built into a kitchen unit or worktop of right size,providing the following minimum distances are allowed; – The edge of the appliance must be a minimum distance of 55mm from a rear wall. – A minimum distance of 20m must be left between the side edges of the appliance and any adjacent cabinets or walls.

  • Page 7: Reassembly And Disassembly

    –Gas pipe or connector shouldn't be bent or blocked by any other appliances – You must conduct a gas leakage test after installation over gas connection and gas pipe. – An oven must have forced ventilation to install a hob above it. –...

  • Page 8: Reassemble Of The Thermocouple

    6.3.2 Reassemble of the Thermocouple Step 1. Insert thermocouple into the the relevant hole of the bottom cup from bottom to top. Step 2. Adjust position of the thermocouple in the hole of the bottom cup. Step 3. screw up the nut to fix the thermocouple. 6.3.3 Reassemble of the Gas Pipe Step 1.Insert the head of the gas pipe into installation parts of the bottom cup or the valve Step 2.Screw up the nut of the joint with spanner...

  • Page 9: Disassembly

    Triple Crown (Rapid) Semi-Rapid Semi-Rapid G20/13 Black-- Blue Black-- Black-- Green Black-- Yellow Black-- Yellow G20/20 Red-- Blue Red-- Red-- Green Yellow Yellow G30/29 Non-- Blue Green Yellow Yellow 6.4. Disassembly 6.4.1 Disassemble the Top Plate Step 1:Remove parts on the Top Plate a.

  • Page 10: Disassemble Of The Thermocouple

    60G40ME097-SFT 60G40ME097-GFT 75G50ME005-SFT 75G50ME060-GFT 6.4.2 Disassemble the Thermocouple Step 1: Unscrew the nut out. Step 2: Pull the silver terminal of Thermocouple Step 3: When reassembling, replace parts correctly 6.4.3 Disassemble of the Ignition Pin Step 1: Pull the washer and take off ignition pin...

  • Page 11: Disassemble Of The Microswitch Harness

    6.4.4 Disassemble of the Microswitch Harness Step 1: Before you disassemble the harness, take off the plastic e – ring. Step 2: When you take off the micro switch harness , please be careful not to break the hook. Step 3: When you reassemble the harness, replace it correctly. Step 4: Detach the wire from the power cord assembly harness.

  • Page 12: Disassemble Of The Power Cord Assembly

    6.4.7 Disassemble of the Power Cord Assembly Step 1 . Detach the wire from the Microswitch Harness. Step 2 . Hold housing of the wire by hand and pull it out of the igniter. Step 3. For power cord grounding, you must use grounding screw attached with washer. Step 4 .

  • Page 13: Disassemble Of The Gas Connection

    6.4. 10 Disasmble of the Gas Connection a. When you disassemble/assemble gas connection, use 2 spanners. One for fixing gas connection elbow, the other for tightening gas hose. b. Tighten enough to prevent gas leakage. c. Once you’re done, conduct leakage test Check Point after assemble a.

  • Page 14: Troubleshooting

    7.Troubleshooting 7.1. Troubleshooting...

  • Page 15: Problems And Corrective Measures

    7.2. Problems and Corrective Measures...
  • Page 16 Note! 1 Check the ground wire before the fault is detected; 2 Enough attention must be given to high voltage circuit.

  • Page 17: Maintenance And Test

    7.3 Maintenance and test Air leakage test Tool: Air leakage device, soapy water 1. Professional repair procedures a) Connect product to the air leakage device and set the test pressure at 15kPa; b) The plug valve shall be kept closed and the gas pipelines may be tested its leakage through air leakage device;...

  • Page 18: Replacement Of Gas-Type Fitting

    Comparison list for injector replacement 注： 8.2. Replacement of gas-type fitting Tool: Open-end wrench...

  • Page 19: Adjustment Of Minimum Level Of The Flame

    Steps for operation: a) Disassemble with a wrench the gas-type fittings from main gas tube. b) Lock tightly a replaceable gas-type fitting onto the main gas tube. 8.3 Adjustment of minimum level of the flame A. Turn the taps down to minimum B.

Table of Contents