Panasonic KX-HCM250 Operating Instructions Manual page 77

Setting explanation
a.
The active time of trigger is set between 9:00 AM to 6:00 PM from
Monday to Friday.
When the alarm occurs in the setting time, the images are transferred
to FTP server, and the notification is sent to the specified user via e-
mail.
The alarm trigger is on when the sensor signal is changed to the
[Rising] (GND to Open High) of External Sensor Input of External I/O.
b.
The secondary time is set inactive.
c.
The transferring image size is 160 x 120, and the image quality is
standard.
d.
Enables the Pre-alarm and Post-alarm Image Buffering:
Network Camera will transfer Pre-alarm 10 images by one image per
minute and Post-alarm 20 images by one image per second when
detecting the alarm trigger.
e.
Setting of FTP server:
IP Address — 192.168.0.20
Port No. — 21
Login ID — Panasonic
Password — ********
Login timing: Every Time
Upload File name — NetworkCamera
File name and time stamp is named to the file.
(Example: NetworkCamera20030101093000000.jpg)
Underlined numbers are "9 h 30 min 00 s 000 ms on January 1, 2003".
Data transfer method — Passive Mode
f.
SMTP server address — xxx.xxx.com
POP3 server address — xxx.xxx.com
Login ID — Panasonic
Password — ********
Mail is sent to "NetworkCamera@xxx.xxx.com" from
"Panasonic@xxx.xxx.com".
Subject is [Mail Transfer].
Text is [Alarm was generated].
[For assistance, please call: 1-800-272-7033]
Operating Instructions
77