Panasonic KX-HCM250 Operating Instructions Manual page 51

[Start Capture] : [Start Capture] saves the individual images to the
[Viewer]
[Primary]
[Secondary]
Notes
• The refresh interval becomes longer as more clients access Network
Camera.
• The image resolution, image quality and object situation affect the
number of frames in the Buffered Image.
• If internal memory is filled after clicking [Start Capture], the image
buffering will stop automatically.
To save still images on your PC
The PC can save still images taken by JPEG - Regularly Refresh and Buffered
Image. The refresh interval of JPEG - Regularly Refresh should be 30 seconds
or more in saving the image.
To save the image, place the cursor on the image and click the right button
of the mouse. Then select "Save Picture As...". Enter a picture name and
save.
Note
The PC cannot save Motion JPEG and [Play] mode images of Buffered
Image.
[For assistance, please call: 1-800-272-7033]
internal memory. Network traffic, PC performance, image
quality and image resolution influence [Play] mode time
and the refresh interval of the image. The resolution is the
same as the current image settings. At a resolution of 320
x 240 in standard, Network Camera stores approximately
560 frames.
: [Viewer] enables you to view the buffered image by
clicking [Start Capture].
: [Primary] enables you to view the buffered image in the
primary time in the Alarm/Timer mode.
: [Secondary] enables you to view the buffered image in
the secondary time in the Alarm/Timer mode.
Operating Instructions
51