Panasonic KX-HCM250 Operating Instructions Manual page 22

Operating Instructions
Network Parameters Table
Parameters
Port No.
IP address
Subnet
Mask
Default
Gateway
DNS
Server 1, 2
DDNS
Max.
Bandwidth
Usage
* Many ISP's intentionally block port number 80 to guard against network
1
viruses. If your ISP blocks port number 80, substitute it to another unused port
number.
* When you use more than one Network Camera with a broadband router, each
2
Network Camera needs its own port number. The broadband router needs the
Port Forwarding feature. Refer to page 37.
* Refer to the broadband router's manual for the Port Forwarding feature.
3
* When you use Network Camera in DHCP feature, check [DHCP] and enter the
4
Host Name if your ISP requires. If you automatically get the address of Default
Gateway and DNS server from DHCP server, you do not need to set up.
* Verify that your ISP supports DHCP. If your ISP supports DHCP, or if you
5
assign a domain name to Network Camera, you need to contract and register
for DDNS service. Refer to the included leaflet for DDNS service. If you set
static global IP address to Network Camera and the broadband router, you do
not need to register DDNS service.
22
Network Camera Configuration Type
[Type 1]
80 (default)
Check [Static],
and set the
static private
IP address.
Set the Subnet Mask fitted to your network.
Set Default
Gateway
address.
Set DNS server address.
You do not
need to setup.
It can restrict the transmit bandwidth.
Select from 0.1 to Unlimited Mbit/s.
[Type 2]
1
80 (default) *
2
*
Check [Static],
and set the
static private
IP address.* 3
Set the private
IP address of the
broadband router
(on your network),
not of the gateway
of your ISP. * 3
5
*
[Type 3]
80 (default)* 1
Check [Static],
and set the
static global
IP address.* 4
Set Default
Gateway
4
address.*
Set DNS server
address.* 4
5
*
[Type 4]
80 (default)
192.168.0.253
(default)
255.255.255.0
(default)
You do not
need to set up.
You do not
need to setup.