Panasonic KX-HCM250 Operating Instructions Manual page 29

3.
Click [Network Configuration]. Network Camera List window appears.
Setup program finds all Network Cameras connected on your local network. It
lists all of MAC addresses and IP addresses of Network Cameras. Network
Cameras that are isolated by the use of a home gateway or broadband router
will not be detected. Record MAC address on the Network Camera Memo on
page 3. It is useful for customer servicing.
Notes
• The setup program finds and identifies Network Camera by listening for
data, which Network Camera sends out for the first 20 minutes after
powering up. If the installation is not completed within 20 minutes,
disconnect temporarily the AC adaptor to restart this operation.
• Each Network Camera has a unique MAC address labeled on the back.
Refer to page 15.
• Network Cameras that are isolated by the use of a home gateway or
broadband router will not be detected.
[For assistance, please call: 1-800-272-7033]
Operating Instructions
(A)
29