Advertisement
1.3.3.
Knob function of Global mode
Hold down the "Global" button, and eight knobs control the master's function, as shown below.
1.3.4.
64 Clip buttons of Session mode
The default mode of the 64 Clip buttons is Session mode. The status of the 64 Clip buttons on the
hardware is synchronized with that of the LIVE software. As shown in the following picture, the
hardware Clip button and the software interface are in the same state.
MIDIPLUS Co, Ltd.
8
http://www.midiplus.com.tw
Advertisement
Need help?
Do you have a question about the SmartPAD II and is the answer not in the manual?
Questions and answers