Table of Contents
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for midiplus minicontrol
Summary of Contents for midiplus minicontrol
- Page 1 Owner's Manual MIDIPLUS Co, Ltd. http://www.midiplus.com.tw...
-
Page 2: Table Of Contents
4.18 PAD operating mode (PAD MODE): ..............5 4.19 RESET ........................5 4.20 Pedal switch (SUSTAIN): ..................5 4.21 USB 2.0: ........................5 (5) 5.1 Restore factory parameter function ............... 6 5.2 Minimum System Requirements ................6 MIDIPLUS Co, Ltd. http://www.midiplus.com.tw... - Page 3 6.14 Modify the alias ......................10 6.15 Data byte (VALUE) ....................10 6.16 Edit channel (CHANNEL) ..................10 6.17 Data type (TYPE) ..................... 10 6.18 Real-time status information (STATUS,DATA1, DATA2,DEC/HEX) ....10 (7) Download minicontrol MIDI Editor software’s web： ..........10 MIDIPLUS Co, Ltd. http://www.midiplus.com.tw...
-
Page 4: Preface
/tick time, scales mode select , PAD Mode select and reset. Pedal input jack and USB socket . minicontrol support apple system and the Microsoft Windows XP/7/8 system, do not need to install the USB driver, the system can directly identify the MIDI USB devices. -
Page 5: Functions Overview
4)， 1. To reduce an octave (octave value less than 4)”OCTAVE UP” LED light; 2. To increase an octave (octave is greater than 4)”OCTAVE DOWN”LED light; MIDIPLUS Co, Ltd. http://www.midiplus.com.tw... -
Page 6: Tap Tempo
MIDI note, with metronome (TAP), reuse the keys of tick TIME (BEAT TIME) are used together, send a note speed adjustment. After the tick is open, arpeggio (ARP) will stop 4.13 Transpose+/-: It is possible to transpose up or down by as much as 12 MIDI notes. MIDIPLUS Co, Ltd. http://www.midiplus.com.tw... -
Page 7: Velocity Curve (Vel/Norm/Heavy/Soft)
QN is a crotchets, so are defined as follows: 1 note = QN * 4 1/16 note = (QN/4) 1/2 note = QN * 2 1/32 note = (QN/8) 1/4 note = QN 1/8 note = (QN/2) MIDIPLUS Co, Ltd. http://www.midiplus.com.tw... -
Page 8: Keyboard Scale (Scale)
There will be a USB jack on the side of the unit. The unit will be a class compliant with both Mac and PC. It will mount as a USB-MIDI device. The unit will be fully powered by USB. MIDIPLUS Co, Ltd. http://www.midiplus.com.tw... -
Page 9: Restore Factory Parameter Function
Editor software, after the modification of the MIDI value at the same time you press the ” TAP””SET” “A/B” three key parameters can restore the factory. 5.2 Minimum System Requirements If you are using your minicontrol with a computer, the following minimum system requirements need: Windows... -
Page 10: Minicontrol Midi Editor Software
MIDI Editor software, pay attention to the computer have to recognize minicontrol USB devices, minicontrol MIDI Editor software can display the connection status and the firmware version number, such as picture 1. Computers have no recognize minicontrol device or No insert minicontrol equipment, open minicontrol MIDI Editor software will display not connected state: Disconnect, such as picture 2, please check. -
Page 11: Midi Editor Software Functional Description
Click "OPEN", can open the saved construction file, the file named “***. CUS” 6.4 Reset parameters and synchronize data to the device (RESET) If minicontrol connected, click the "RESET", the software configuration parameters restore to the factory, and synchronous data to the minicontrol ; MIDIPLUS Co, Ltd. http://www.midiplus.com.tw... -
Page 12: Export Construction File (Export)
If minicontrol not connected, click the "RESET", said the wrong window will pop up, remind users to connect minicontrol . 6.5 Export construction file (EXPORT) Click on the "EXPORT", the user parameter export is saved as a file, in order to backup the user parameter file;... -
Page 13: Drum Pad
“TYPE” select “NOTE”, “VULUE” fill in 127, the synchronous data to the minicontrol , minicontrol sends a message format for the encoder (state bytes: 0x90, data bytes: 0x7f, velocity bytes: 0 ~ 0x7f) 6.16 Edit channel (CHANNEL)
Need help?
Do you have a question about the minicontrol and is the answer not in the manual?
Questions and answers