Regent Lighting Solutions Boulevard Installation Instructions

Save These Instructions for Future Reference
ALL CONNECTIONS TO BE CARRIED OUT BY A QUALIFIED ELECTRICIAN
PLEASE READ CAREFULLY BEFORE STARTING INSTALLATION.
Electronic/Magnetic Control Device
Save These Instructions for Future Reference
Electrical products can cause death, injury, or damage to
property. Installation of this product must be carried out by a
qualified electrician, in compliance with SANS 10142 or
corresponding regulations of the country of installation. On
completion of installation, the Certificate of Compliance must
be updated.
For non user replaceable light source: The light source contained in this luminaire
shall only be replaced by the manufacturer or his/her service
agent or a similar qualied person
WARNING: TO AVOID FIRE, SHOCK OR DEATH
TURN OFF POWER AT CIRCUIT BREAKER OR FUSE AND TEST THAT THE POWER IS OFF BEFORE WIRING
ALL LUMINAIRES SUPPLIED AND TO BE INSTALLED ABOVE AND BELOW 5 METERS ARE IN COMPLIANCE WITH SANS
60598 SECTION 3.5.6 ACCORDING TO THE MANUFACTURER GUARANTEE AND WARRANTY
Regent Lighting reserves the right to change specifications modify designs and discontinue items without
incurring obligation and whilst every effort is made to ensure that descriptions, specifications and other
information in this catalogue are correct, no warranty is given in respect thereof and the company shall not be
liable for any error therein.
www.regentlight.co.za
REGENT LIGHTING A DIVISION OF WAHL
INDUSTRIES.
www.regentlight.co.za
WARNING
ELECTRIC SHOCK
HAZARD
This equipment is to be
serviced by trained
personnel only.
Boulevard
3 - 13 MAIN REEF SERVICE ROAD, CORNER
SPRINGBOK AND MAIN REEF ROAD, INDUSTRIA,
JOHANNESBURG. SOUTH AFRICA.
TEL : +27 11 474 0171
January 2024
INSTALLATION INSTRUCTIONS
PLEASE READ CAREFULLY BEFORE STARTING INSTALLATION.
ALL CONNECTIONS TO BE CARRIED OUT BY A QUALIFIED ELECTRICIAN
Electronic/Magnetic Control Device
DO NOT CONNECT THE FITTING LIVE
1
1
7 1
(CONNECT) WHEN
Single way LIVE AS IT WILL CAUSE
DAMAGE TO THE
A
2
5 5
B
C
Ground level
Assembly of buried
base plate
Boulevard
WARNING
ELECTRIC SHOCK
HAZARD
This equipment is to be
serviced by trained
personnel only.
Requirements:
Be sure the electricity to the
Ÿ
system you are working on is
isolated.
If the main supply power (live) is
Ÿ
Double way
on, it will cause damage to the
luminaire.
1. Ensure the pole is correctly installed
buried.
DO NOT PLUG
A. Ensure the electrical cable is fed
through the mounting hole.
Ground Level
LUMINAIRE.
A
B. Insert Power cable into the cable entry
hole and feed the electrical cable through
towards the excess door.
x2 Hook
bolts
Ground Level
B
Blank
base plate
Bolt
hook nuts
C. Burry pole and secure pole into the
ground