Regent Lighting Solutions Halo Installation Instructions

Save These Instructions for Future Reference
ALL CONNECTIONS TO BE CARRIED OUT BY A QUALIFIED ELECTRICIAN
PLEASE READ CAREFULLY BEFORE STARTING INSTALLATION.

WARNING

Electronic/Magnetic Control Device
Save These Instructions for Future Reference
Electrical products can cause death, injury, or damage to
property. Installation of this product must be carried out
Replaceable
by a qualified electrician, in compliance with SANS 10142
electrical
or corresponding regulations of the country of installation.
components
On completion of installation, the Certificate of
Compliance must be updated.
For non user replaceable light source: The light source contained in this luminaire
shall only be replacedby the manufacturer or his/her service
agent or a similar qualied person
WARNING: TO AVOID FIRE, SHOCK OR DEATH
TURN OFF POWER AT CIRCUIT BREAKER OR FUSE AND TEST THAT THE POWER IS OFF BEFORE WIRING
ALL LUMINAIRES SUPPLIED AND TO BE INSTALLED ABOVE AND BELOW 5 METERS ARE IN COMPLIANCE WITH SANS
60598 SECTION 3.5.6 ACCORDING TO THE MANUFACTURER GUARANTEE AND WARRANTY
Regent Lighting reserves the right to change specifications modify designs and discontinue items without
incurring obligation and whilst every effort is made to ensure that descriptions, specifications and other
information in this catalogue are correct, no warranty is given in respect thereof and the company shall not be
liable for any error therein.
www.regentlight.co.za
REGENT LIGHTING A DIVISION
OF WAHL INDUSTRIES.
April 2020
www.regentlight.co.za
ELECTRIC SHOCK
HAZARD
This equipment is to be
serviced by trained
personnel only.
Halo
3 - 13 MAIN REEF SERVICE ROAD, CORNER
SPRINGBOK AND MAIN REEF ROAD, INDUSTRIA,
JOHANNESBURG. SOUTH AFRICA.
TEL : +27 11 474 0171
INSTALLATION INSTRUCTIONS
PLEASE READ CAREFULLY BEFORE STARTING INSTALLATION.
ALL CONNECTIONS TO BE CARRIED OUT BY A QUALIFIED ELECTRICIAN
WARNING
Electronic/Magnetic Control Device
DO NOT CONNECT THE FITTING LIVE
1
1
Complete Halo
tting.
2
2
Stepped Modern Pole
Bolts
Access
door
Plan view
Halo
ELECTRIC SHOCK
HAZARD
This equipment is to be
serviced by trained
personnel only.

Requirements:

Be sure the electricity
Ÿ
to the system you are
working on is
isolated.
If the main supply
Ÿ
power (live) is on, it
will cause damage
to the luminaire.
1. Fiting as supplied in
Regent Lighting
Solutions box.
2 Ensure the your cage is
installed correctly. you
s h o u l d h a v e y o u r
t h r e a d e d r o d 2 6 m m
above the ground
The two bolts face away
from the road at a 90
degree angle and that
the pole has the correct
diameter of ø76mm.
Access door to face in
the same direction as the
two bolts.(If applicable)
26
Ground level
www.regentlight.co.za
50