Advertisement
Quick Links
Save These Instructions for Future Reference
ALL CONNECTIONS TO BE CARRIED OUT BY A QUALIFIED ELECTRICIAN
PLEASE READ CAREFULLY BEFORE STARTING INSTALLATION.
Electrical products can cause death, injury, or damage to
property. Installation of this product must be carried out by a
qualified electrician, in compliance with SANS 10142 or
corresponding regulations of the country of installation. On
completion of installation, the Certificate of Compliance must
be updated.
WARNING: TO AVOID FIRE, SHOCK OR DEATH
TURN OFF POWER AT CIRCUIT BREAKER OR FUSE AND TEST THAT THE POWER IS OFF BEFORE WIRING
ALL LUMINAIRES SUPPLIED AND TO BE INSTALLED ABOVE AND BELOW 5 METERS ARE IN COMPLIANCE WITH SANS
60598 SECTION 3.5.6 ACCORDING TO THE MANUFACTURER GUARANTEE AND WARRANTY
Regent Lighting reserves the right to change specifications modify designs and discontinue items without
incurring obligation and whilst every effort is made to ensure that descriptions, specifications and other
information in this catalogue are correct, no warranty is given in respect thereof and the company shall not be
liable for any error therein.
www.regentlight.co.za
REGENT LIGHTING A DIVISION OF WAHL
INDUSTRIES.
December 2017
www.regentlight.co.za
WARNING
ELECTRIC SHOCK
HAZARD
This equipment is to be
Electronic Control Device
serviced by trained
personnel only.
Penza
3 - 13 MAIN REEF SERVICE ROAD, CORNER
SPRINGBOK AND MAIN REEF ROAD, INDUSTRIA,
JOHANNESBURG. SOUTH AFRICA.
TEL : +27 11 474 0171
INSTALLATION INSTRUCTIONS
PLEASE READ CAREFULLY BEFORE STARTING INSTALLATION.
ALL CONNECTIONS TO BE CARRIED OUT BY A QUALIFIED ELECTRICIAN
Electronic Control Device
DO NOT CONNECT THE FITTING LIVE
1
1
Symmetrical 72W LED RLS858
Asymmetrical 72W LED RLS014
Penza
WARNING
ELECTRIC SHOCK
HAZARD
This equipment is to be
serviced by trained
personnel only.
Requirements:
Be sure the electricity
to the system you are
working on is isolated.
If the main supply
power (live) is on, it will
cause damage to the
luminaire.
1. Ensure the pole is
installed correctly and that
the pole has the correct
diameter of ø76mm.
DO NOT PLUG
(CONNECT) WHEN
LIVE AS IT WILL CAUSE
DAMAGE TO THE
LUMINAIRE.
Advertisement
Related Manuals for Regent Lighting Solutions Penza
Summary of Contents for Regent Lighting Solutions Penza
- Page 1 Penza Save These Instructions for Future Reference INSTALLATION INSTRUCTIONS ALL CONNECTIONS TO BE CARRIED OUT BY A QUALIFIED ELECTRICIAN PLEASE READ CAREFULLY BEFORE STARTING INSTALLATION. PLEASE READ CAREFULLY BEFORE STARTING INSTALLATION. ALL CONNECTIONS TO BE CARRIED OUT BY A QUALIFIED ELECTRICIAN...
- Page 2 Important Safety Instructions Use only the correct light bulbs/LED as stipulated on the carton for the product. This product should be installed by a competent person i.e. Qualified electrician. Any modifications of this product after supply will result in the guarantee being void. This product requires a constant stable electrical supply 220V - 240V VAC 50Hz - alternating current.
Need help?
Do you have a question about the Penza and is the answer not in the manual?
Questions and answers