Advertisement
Available languages
Available languages
Rubber plug
A rubber plug has been included with your ADC-V724/
724X at the base of the mount. This rubber plug should
only be used if you are mounting it directly over a hole in
the wall. The rubber plug will provide a seal to prevent
water from entering the hole in the wall behind the
camera.
In all other installations, please remove the rubber plug.
Removing the rubber plug will allow you to route the
power cable through the mouse hole without bending or
breaking the cable.
https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Video_Devices/1080p_Outdoor_Wi-Fi_Camera_with_Tw...
Updated: Tue, 09 Jul 2024 14:43:59 GMT
6
Advertisement
Need help?
Do you have a question about the ADC-V724 and is the answer not in the manual?