◦ To watch a video about this process, see
6. Select the camera from the video device list or enter its MAC address to begin adding the camera. The MAC
address is located on the camera or on the packaging.
7. Follow the on-screen instructions to finish adding the camera.
You can now power down the camera and install it in its final location using the included hardware. You may configure
camera settings from the customer website.
WPS mode (alternate)
To watch a video about the WPS connection process, see
(WPS
Mode).
To ensure sufficient Wi-Fi signal, complete these steps with the camera near its final location but prior to mounting.
1. Connect the camera's AC power adapter and plug it into a non-switched outlet.
2. After the startup process is complete (the camera's LED will be blinking white), press and hold the WPS/Reset
button and release when the LED begins to blink blue (about 3 seconds).
3. Activate WPS mode on the router. The camera will begin to connect to the Wi-Fi network. The LED will be solid
green when the connection is complete.
4. Add the device to the account by either selecting the account in the MobileTech app or by using a web browser
and entering the following web address: www.alarm.com/addcamera (you will need the customer user name and
password).
◦ To watch a video about this process, see
5. Select the camera from the video device list or enter its MAC address to begin adding the camera. The MAC
address is located on the camera or on the packaging.
6. Follow the on-screen instructions to finish adding the camera.
You can now power down the camera and install it in its final location using the included hardware. You may configure
camera settings from the customer website.
https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Video_Devices/1080p_Outdoor_Wi-Fi_Camera_with_Tw...
ADC-V724/724X Adding to Your
ADC-V724/724X Connecting to your Wi-Fi Network
ADC-V724/724X Adding to Your
Account.
Account.
Updated: Tue, 09 Jul 2024 14:43:59 GMT
8
Need help?
Do you have a question about the ADC-V724 and is the answer not in the manual?