Alarm.Com ADC-VC726 Installation Manual

Indoor/Outdoor Mini Bullet (ADC-VC726) Installation Guide

Pre-setup Checklist:

• ADC-VC726 camera (included)
• AC power adapter (required for non-PoE connections)
• Broadband (Cable, DSL or Fiber Optic) Internet connection with router
• A computer or mobile device with Internet access
• An Ethernet / Cat5 cable
• Login and Password for the Alarm.com account to which you will add the camera

Add the camera to an Alarm.com account

Complete these steps prior to installing the camera in its final location:
1. Connect the camera to the router via an Ethernet cable.
2. If the Ethernet connection does not provide power, connect the camera to the optional AC power adapter (sold
separately) and plug the adapter into a non-switched outlet.
3. Wait 2 minutes for the camera to connect to the Internet.
4. Add the device by either selecting the account in MobileTech OR by using a web browser and entering the
following URL: www.alarm.com/addcamera
5. Select the camera from the video list or type in its MAC address to begin adding the camera. The camera's MAC
address is located on the product label.
6. Follow the on-screen instructions to finish adding the camera. You may configure camera settings from the
Customer Website.
You can now unplug the camera and install it in its final location using the included hardware.
https://answers.alarm.com/Installation_and_Troubleshooting/Video_Devices/Indoor%2F%2FOutdoor_Mini_Bullet_(ADC-VC726)/Indoor%2
Updated: Mon, 23 Apr 2018 23:21:21 GMT
1