Alarm.Com Knowledge Base ADC-VC826 Installation Manual

Alarm.Com Knowledge Base ADC-VC826 Installation Manual

Indoor/outdoor dome camera

Advertisement

Indoor/Outdoor Dome (ADC-VC826) - Installation Guide

Pre-setup checklist

• ADC-VC826 camera (included)
• AC/DC power adapter (required for non-PoE connections)
• Broadband (Cable, DSL or Fiber Optic Internet connection with router)
• A computer or mobile device with Internet access
• An Ethernet / Cat5 cable
• Login and Password for the Alarm.com account to which you will add the camera
For a detailed list of this video device's features, see

Add the camera to an Alarm.com account

Complete these steps prior to installing the camera in its final location.
1. Connect the camera to the router via an Ethernet cable. For more information about connecting video devices
using PoE, see
Connect a video device using Power-Over-Ethernet
2. If the Ethernet connection does not provide power, connect the camera to the optional AC power adapter (sold
separately) and plug the adapter into a non-switched outlet.
3. Wait a few minutes for the camera to connect to the Internet.
4. Add the device to the account by selecting the account in the MobileTech app, by using the Customer app Video
Installation Wizard, or by using a web browser and entering the following web address:
addcamera
(you will need the customer's user name and password if using the Customer Website or app).
5. Follow the on-screen instructions to add and set up the video device. For more information about adding a camera
to an account, see
6. Once the camera is enrolled on the account, power down the camera and install it in its final location using the
included hardware. For information about additional compatible mounting brackets for this device, see
mounting brackets are compatible with the ADC-VC826 Indoor/Outdoor Dome
Note: The camera's lens angle is adjusted manually. Verify that it is angled according to the needs of the user
during installation.
https://answers.alarm.com/ADC/Partner/Installation_and_Troubleshooting/Video_Devices/Indoor_Outdoor_Dome_ADC-VC82...
Enroll the video device to the customer
Indoor/Outdoor Dome (ADC-VC826) - Data
(PoE).
account.
Sheet.
www.alarm.com/
Camera?.
Updated: Thu, 16 Sep 2021 16:35:14 GMT
Which
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Knowledge Base ADC-VC826 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Alarm.Com Knowledge Base ADC-VC826

  • Page 1 • A computer or mobile device with Internet access • An Ethernet / Cat5 cable • Login and Password for the Alarm.com account to which you will add the camera For a detailed list of this video device's features, see Indoor/Outdoor Dome (ADC-VC826) - Data Sheet.
  • Page 2 2. Unscrew and remove the camera cover, being careful not to damage the connecting wires. 3. Press and hold the Reset button while reconnecting power Continue to hold the Reset button for 10 seconds. https://answers.alarm.com/ADC/Partner/Installation_and_Troubleshooting/Video_Devices/Indoor_Outdoor_Dome_ADC-VC82… Updated: Thu, 16 Sep 2021 16:35:14 GMT...
  • Page 3 Questions? Visit: www.alarm.com/supportcenter Additional resources Enroll in the Video as a Service 201 training course today! For more information on accessing Academy Training, How can I access Academy Training?. https://answers.alarm.com/ADC/Partner/Installation_and_Troubleshooting/Video_Devices/Indoor_Outdoor_Dome_ADC-VC82… Updated: Thu, 16 Sep 2021 16:35:14 GMT...

Table of Contents