Alarm.Com ADC-VDB101 Installation Manual

Alarm.Com ADC-VDB101 Installation Manual

Wi-fi doorbell camera and slim line ii

Advertisement

Alarm.com Wi-Fi Doorbell
Camera and Slim Line II
Installation Guide
ADC-VDB101 and ADC-VDB105X
ADC-VDB102 and ADC-VDB106X

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ADC-VDB101 and is the answer not in the manual?

Questions and answers

Summary of Contents for Alarm.Com ADC-VDB101

  • Page 1 Alarm.com Wi-Fi Doorbell Camera and Slim Line II Installation Guide ADC-VDB101 and ADC-VDB105X ADC-VDB102 and ADC-VDB106X...
  • Page 2 Introduction Your customers will always know who is at the front door with an Alarm.com Doorbell Camera. Now with two options to choose from – our original Wi-Fi Doorbell Camera and our new Slim Line II – it’s easy to deliver front door awareness to even more customers! Each Alarm.com Doorbell Camera features a doorbell with...
  • Page 3 SkyBell V1 and V2 not compatible ∙ Digital chime SkyBell V1 and V2 cameras are not compatible with Alarm.com. If the chime has a speaker that plays a tone when pressed, it is digital and will require the installation of the SkyBell Digital...
  • Page 4 Internet speed Note: The adapter may say “TO SKYBELL” on the side. Please disregard. ❺ In the test results, note the upload speed. The Alarm.com Doorbell Cameras require an upload speed of at least 2 Mbps. Hardware installation Alarm.com Doorbell Cameras Alarm.com’s Doorbell Camera hardware must be used:...
  • Page 5 We recommend the customer select the “Keep me logged in” option temporary Wi-Fi network on the Login screen in the Alarm.com app so that they can respond to push notifications from the doorbell camera more quickly. The syncing process will instruct you to connect to the doorbell camera’s temporary Wi-Fi network.
  • Page 6 Notifications & recording schedules Notes: (continued) The Alarm.com Wi-Fi Doorbell Camera will flash Blue before it flashes Yellow – do not release during the flashing Blue phase (this Event triggered (for example, alarm) will power cycle the device). Record a clip after a sensor is activated or after an alarm.
  • Page 7 Transformer replacement If you have confirmed there is a transformer failure, there are two options for transformer replacement. You can either use a plug-in wall-wart style transformer or wire a new transformer into the home’s mains lines, physically replacing the existing transformer (a professional electrician is recommended for this installation).
  • Page 8 8281 Greensboro Drive Suite 100 201130 Tysons, VA 22102 © 2020 Alarm.com. All rights reserved.

This manual is also suitable for:

Adc-vdb105xAdc-vdb102Adc-vdb106x

Table of Contents