Setting The Clock - Panasonic Lumix DMC-ZS1 Operating Instructions Manual

Setting the clock

Set REC/PLAY switch to
REC/PLAY switch
To change time setting
Select 'CLOCK SET' from
SETUP menu (P.21), perform
and .
• Clock settings will be saved for
approx. 3 months even after
battery is removed, provided
a fully-charged battery was
installed in camera for the 24
hours beforehand.
To set local time at travel
destination
'WORLD TIME' (P.68)
Failure to set the date and time will cause the date/time to be improperly printed when printing
pictures in digital photo center or when using 'TEXT STAMP' (P.90).
Year can be set between 2000 and 2099.
After the time has been set, the date can be printed correctly even if the date is not displayed on the
camera screen.
before turning on power.
Turn on the power
'PLEASE SET THE CLOCK' will be displayed
when power is turned on for the first time.
While this message is displayed
Select the setting item (year,
month, date, time, display order,
time display format), and set.
• To cancel → Press
• Setting example of display order and time display format
[M/D/Y] [24HRS]: 12:34 APR.15.2009
[D/M/Y] [AM/PM]: PM 12:34 15.APR.2009
[Y/M/D] [24HRS]: 2009.4.15 12:34
When set to [AM/PM], 0:00 midnight is AM 12:00,
and 0:00 noon is PM 12:00.
Set
• Turn on power again and check time display.
(Time and date can be displayed by pressing
'DISPLAY' several times.)
( The clock is not set when the
camera is shipped.)
' '
Press MENU/SET
Select the
setting
item
Set the
date, Select the display format
time, or
display.
.
' '
Press MENU/SET
17
VQT1Z82