Copying Still Pictures And Motion Pictures - Panasonic Lumix DMC-ZS1 Operating Instructions Manual

Some computers can read directly from the camera's memory card.
For details, see the manual for your computer.

Copying still pictures and motion pictures

Set-up:
• Use a fully charged battery, or connect the AC adaptor (DMW-AC5PP, sold separately)
and Multi Conversion Adaptor (DMW-MCA1, sold separately). (P.103)
• Card : Insert card and set mode dial to any except
Built-in memory: Remove card
ACCESS (sending data)
• Do not disconnect the USB connection
cable while 'ACCESS' is displayed.
Turn on power of both
camera and computer
Connect camera to
computer
Please make sure you use the
supplied USB connection cable.
Use of cables other than the supplied
USB connection cable may cause
malfunction.
To cancel connection
Check socket direction and insert straight in.
(Damage to socket shape can lead to faulty operation.)
USB connection cable
(always use cable supplied)
Click 'Safely Remove Hardware' in the Windows
System Tray → disconnect USB connection cable
→ turn off camera power → disconnect AC adaptor
Select 'PC' on the camera
A message may be displayed on screen
if 'USB MODE' (P.24) is set to 'PictBridge
(PTP)'. Select 'CANCEL' to close the
screen, and set 'USB MODE' to 'PC'.
Operate with your
computer
101
VQT1Z82