Lcd Mode/ Display Size/ Guide Line/ Histogram/ Rec Area - Panasonic Lumix DMC-ZS1 Operating Instructions Manual

Using SETUP menu
Item
LCD MODE
Make LCD monitor easier
to see.
DISPLAY SIZE
Change the display size
of the menu.
GUIDE LINE
Select recording
information display and
types of guidelines.
(P.42)
HISTOGRAM
Check subject brightness
on graph. (P.42)
REC AREA
Enables verification of
the recordable area for
a motion picture before
recording.
22
VQT1Z82
OFF: Normal (cancel setting)
AUTO POWER LCD:
The brightness is adjusted automatically depending on
how bright it is around the camera.
POWER LCD:
Makes screen brighter than normal (for outdoor use).
HIGH ANGLE:
Makes screen easier to see when taking pictures from
high positions. (becomes harder to see from the front)
• 'HIGH ANGLE' will be canceled when power is turned off
(including POWER SAVE).
• Block out sunlight (with hand, etc.) if reflection makes screen difficult to see.
• 'AUTO POWER LCD' or 'HIGH ANGLE' cannot be used in the following cases.
During playback mode or menu screen display, or when
connected to computer/printer.
• 'POWER LCD' will be deactivated if no operations are performed for 30
seconds while recording. (Brightness can be restored by pressing any button)
• Brightness/color of screen in 'LCD MODE' has no effect on pictures recorded.
• 'AUTO POWER LCD' cannot be set in playback mode.
• The number of recordable pictures and the recording time are
reduced when using 'AUTO POWER LCD' or 'POWER LCD'.
STANDARD/LARGE
REC. INFO.
OFF/ON (Display recording information with guide lines.)
PATTERN
/
OFF/ON
OFF/ON
• Recordable area displayed for motion
pictures should be interpreted as a
guideline.
• When using extended optical zoom,
the recordable area may not always be
displayed for certain zoom ratios.
• This setting cannot be used with Intelligent
Auto Mode.
The 'REC AREA' menu item is not available in the DMC-ZS1.
(Continued)
Settings, notes
: Change the patterns of guide lines.
This section is not
recorded.