Printing; On The Camera - Panasonic Lumix DMC-ZS1 Operating Instructions Manual

Printing

You can connect directly to a PictBridge-
compatible printer for printing.
Set-up:
• Use a fully charged battery, or connect the
AC adaptor (DMW-AC5PP, sold separately)
and Multi Conversion Adaptor (DMW-MCA1,
sold separately). (P.103)
• Card
Built-in memory: Remove card
• Adjust settings on your printer (print quality,
etc.) as required.
• Set mode dial to any setting other than
CLIPBOARD.
• Do not disconnect the USB connection cable when
the cable disconnection icon
not be displayed with some printers).
Check socket direction and insert straight in.
(Damage to socket shape can lead to faulty
operation.)
USB connection cable
(always use cable supplied)
To cancel print
Do not use any other USB connection cables except the supplied one.
Disconnect USB connection cable after printing.
Turn off power before inserting or removing memory cards.
When the battery begins to run out during communication, the status indicator flashes
and a warning beep sounds. Cancel printing and disconnect USB connection cable
(recharge the battery before reconnecting).
Setting the 'USB MODE' (P.24) to 'PictBridge (PTP)' removes the need to make the
setting each time the camera is connected to the printer.
Motion pictures recorded in 'AVCHD Lite' format cannot be printed.
104
VQT1Z82
: Insert card
(Copy clipboard pictures to
the card (P.82))
is displayed (may
Press 'MENU/SET'
Turn on power of both
camera and printer
Connect camera to printer
Please make sure you use the
supplied USB connection cable. Use
of cables other than the supplied
USB connection cable may cause
malfunction.
Select 'PictBridge (PTP)'

on the camera

When 'CONNECTING TO PC...' is
displayed, cancel the connection
and set 'USB MODE' to either
'SELECT ON CONNECTION' or
'PictBridge(PTP)' (P.24).
Select picture to print
with ◄► and set
Select 'PRINT START'
(Print settings
→
P.106)