Advertisement
BGB30-BQR
30" Grill Dimensions
Grill Model: BGB30-BQR
Cart Models: BGA30-CSS/CAD-30
MODEL NUMBER
TOTAL COOKING AREA
PRIMARY COOKING AREA
(GRILL AREA)
SECONDARY COOKING AREA
(WARMING RACK)
GRILL BURNERS
OPTIONAL SIDE BURNER
(CART MOUNT)
INTEGRATED ROTISSERIE BURNER
GRILL GRATES
SHIPPING WEIGHT
(GRILL HEAD)
SHIPPING WEIGHT
(OPTIONAL CART)
SHIPPING DIMENSIONS
(HEIGHT X WIDTH X DEPTH)
(with optional grill cart)
BGB30-BQR
760 SQ. INCHES
565 SQ. INCHES
195 SQ. INCHES
2 @ 25,000 BTU/HR
1 OR 2 @ 17,000 BTU/HR
1 @ 14,000 BTU/HR
STAINLESS STEEL
164 LBS.
95 LBS.
28" X 32-1/2" X 29-1/2"
30" Grill Island Preparation
Grill Model: BGB30-BQR
3" to non-combustible
construction/
min. for lid clearance
12" min. combustible
construction
Vent
Vent
Max.
* Standard cut-out dimensions for non-combustible enclosure
** Insulated jacket cut-out dimensions for combustible enclosure
Island installation to use minimum of 3 vents providing
10 square inches per vent (typical).
Ordering Data:
Please specify gas type (natural or propane) when ordering
Gas Requirements:
Natural
• 1/2" NPT male with a 3/8" flare adapter
• Operational Pressure: 4" W.C.
• Supply Pressure: 6" to 9" W.C.
Propane
• 1/2" NPT male with a 3/8" flare adapter
• LP hose with a quick disconnect & fitting are shipped connected
• Operational Pressure: 10" W.C.
• Supply Pressure: 11" to 14" W.C.
Power Requirements:
• 120V 60Hz for models with Rotisserie Motor.
Island Ventilation Requirements:
It is recommended that adequate ventilation holes must be
provided in the base of an enclosure in the event of a gas leak.
Grill Placement:
DO NOT build grill under overhead unprotected combustible
construction. Use only in well-ventilated areas. These units are
for outdoor use only. If located in a consistently windy area
(oceanfront, mountaintop, etc.) a wind break will be required.
Conversion Kits:
NG to LP and LP to NG conversion kits are available from your dealer.
Accessories
• Stainless Steel Grill Cart (CAD-30, BGB30-CSS)
• Single or double side burners for built-in application
• Stainless Steel Access Doors for built-in application
• Stainless Steel Access Drawers for built-in application
• Insulated Jacket for built-in application
• Grilling Tool Set
• Brazilian Cherry Chopping Board that fits in cart side-shelf
• Drop-on Griddle Plate
• Vinyl Grill Cover
• Wok and Wok Ring for use on side burners
We encourage you to find out more about these features and learn how they can
make your cooking experience more enjoyable by visiting our learning page at:
www.dcsappliances.com.
Because of continuing product improvement these specifications are subject to
change without notice.
Note: Locate electrical
service on the right hand
side for rotisserie motor
connection.
4" x 4" opening for
gas supply line
Vent
access doors
(ADN20x30)
access drawers
(ADR 30)
Summer 2008
41
Advertisement
