Nortel Meridian Meridian 1 Feature Description And Administration page 1754

Page 1754 of 1814
553-2901-301 Standard 9.00 January 2002
ISDN BRI features
Group Hunt
Group Hunt is partially supported on ISDN BRI terminals, as explained
below:
• an ISDN BRI terminal cannot be a member of a group hunt list, due to
lack of support of FFC (Group Hunt Deactivation is not possible);
• an ISDN BRI terminal cannot access a group hunt list, since FFCs are not
supported;
• a call from an ISDN BRI terminal to another ISDN BRI terminal may be
hunted, or call forwarded no answer, to a Group Hunt Pilot DN FFC.
Incoming DID Digit Conversion
An ISDN BRI DN can be defined as the converted DN, however, the dialed
number identification service number will not be displayed on an ISDN BRI
terminal.
Intercept Computer Interface
This feature allows the Meridian 1 to use an intercept (attendant assistance
service) computer for storing and retrieving call messages. Calls to an absent
tenant's DN using this feature are routed to a designated Intercept Position
(ICP) DN. A terminal at the ICP displays a message stating why the tenant
at the DN is absent. The person at the ICP can then store the caller's message
for the tenant's DN and activate the message waiting LED at the tenant's
telephone. The tenant at the DN retrieves the stored caller messages by
calling the ICP, where the messages are displayed on the terminal (or
optionally printed).
The feature can be activated or deactivated by the following:
• Flexible Feature Code (FFC) dialed from the tenant's telephone. This
code specifies the reason for the tenant's absence and can be extended
with a date and time as extra information. The FFC decodes into a text
message;
• Pressing the Call Forward All Calls (CFW AC) key on an SL-1 telephone
(deactivation);
• From the ICP terminal;
• Automatically when a TN is disabled or enabled by a maintenance
overlay program.