Nortel Meridian Meridian 1 Feature Description And Administration page 1431

LD 17 – Configure the Release ID for the D-channels.
Prompt Response
REQ CHG
TYPE ADAN
ADAN CHG DCH xx
RLS xx
LD 15 – Allow or deny the Break-in Warning Tone.
Prompt Response
REQ: CHG
TYPE: FTR
CUST xx
...
OPT (BWTD)
BWTA
LD 16 – Configure the Priority Level for the route.
Prompt Response
REQ NEW
CHG
TYPE RDB
Network Break-in and Force Disconnect
5 LD 11 - Configure break-in and force disconnect Classes of Service,
function keys, warning tone options, and PLEV values.
6 LD 57 - Configure the Flexible Feature Codes (FFCs).
Description
Change existing data.
Action Device and Number.
Change D-channels.
Software Release ID of the switch at the far-end of the
D-channel, where xx is 25 or higher.
Description
Change existing data.
Feature data.
Customer number.
Break-in Warning Tone Denied (default).
Break-in Warning Tone Allowed.
Description
Add new data.
Change existing data.
Route Data Block.
International ISDN PRI Feature description and administration
Page 1431 of 1814