Kozyard XTT-231 Assembly Manual

Patio dining square table

Download this manual

Dining

Patio

Square Table

ASSEMBLY INSTRUCTIONS

Assembly Manual

Prior to assembly, make sure you lay out and identify all the parts listed

below in the parts list.

Tighten all nuts and bolts securely. All bolts should be hand tightened

before use. Never use power tools or excessive force during assembly

and tightening of bolts.

Should you experience any difficulty during assembly or if any part is

missing or damaged:

Contact our customer service by email: info@kozyard.com or call toll

free: 866-355-0018.

Need help?

Do you have a question about the XTT-231 and is the answer not in the manual?

Page 1 Should you experience any difficulty during assembly or if any part is missing or damaged: Contact our customer service by email: info@kozyard.com or call toll free: 866-355-0018. Copyright 2016 - 2024 Kozyard LLC. | All Rights Reserved.
Page 2 Part list Part Description Connect the Top (Part A) and Legs (Part B) using Screws(D) and Washer (F) and plastic cap (E) as shown in diagram. Leg Connector M6 × 20 Screws Plastic cap Washer Allen key Reminder: All parts must be put on the carpet in the assembly.
Page 3 Connect Leg Connector (Part C) with Legs (Part B) Eventually,check all screws are fixed tightly using screws (D) and Washer (F) and plastic cap (E) before using on the level ground. as shown in diagram. Reminder: All parts must be put on the carpet in the assembly.