Wireless>Management; Wireless>Management>Access List - NetComm NB5Plus4 User Manual

Wireless>Management
The Wireless Management function gives another level of security to your AP. It
allows you to create an allowed access list or a banned access list (not both), and
view a list of stations associated with your access point.
Wireless>Management>Access List
By clicking on Management from the left-hand navigation list, you are taken to the
default Access List screen.
You can create an allowed OR banned access list from the Access List screen by
performing the following procedures.
1. Check Enable Access List.
2. Select Allow to create an allowed access list or Ban to create a banned list.
Note: You can not create both.
3. Enter a MAC (Medium Access Control) address of an allowed or banned station,
then click the Add button. This station will appear in your allowed or banned ac-
cess list.
4. Repeat this step for each station.
5. To save your settings, refer to the ''Save Your Changes'' section above.
YML754 Rev1
www.netcomm.com.au
NB5Plus4/W User Guide
91