NB5Plus4W Antenna Instructions
Before continuing with the Hardware installation, you may need to connect the
Antenna
1. The antenna has a retaining nut which must be screwed into the SMA connector
on the back of the modem. Place the screw retaining nut over the antenna con-
nection on the rear of the NB5Plus4W and turn it clockwise.
Note:
Do not over-tighten the attaching nut - but do make sure that you have
screwed it all the way to its end.
2. Bend the antenna to a 90
Note:
Please note that you may have to rotate the complete antenna assembly to
do this and have the antenna pointing vertically.
YML754 Rev1
www.netcomm.com.au
o
angle.
NB5Plus4/W User Guide
15
Need help?
Do you have a question about the NB5Plus4 and is the answer not in the manual?
Questions and answers