Easy Port Forwarding: Applying Pre-Defined Rules - NetComm NB5Plus4 User Manual

Easy Port Forwarding: Applying Pre-Defined Rules
Available pre-defined rules are categorised according to the application type. Click
the Radio Button adjacent to the appropriate Category, and then select the required
application name. Click on the Add button to move the application into the Applied
Rules box. In the example shown on the previous page, 'Delta Force' has been se-
lected from the list of Available Rules and is about to be copied to Applied Rules. In
the example, this will configure your Modem ports to use with 'Delta Force' .
Option
WAN Connection:
Allow Incoming Ping:
Select LAN Group:
LAN IP:
New IP:
NB5Plus4/W User Guide
52
Description
Refers to the active Connection Profile.
Enabling this feature allows users on
the WAN side of your modem to receive
replies to an ICMP ping command. Use-
ful for testing remote connection to your
modem.
Select the LAN group for which you are
setting up the port forwarding rules for.
Select the device (PC) to which you will
be port forwarding data to. The default
will be the LAN device currently logged
in to the modem's web interface. For
example, if you had a web server with
IP address 192.168.1.100, you would
select this from the drop-down list.
If you wish to manually add a LAN client
so that you can apply rules to it, click
on the New IP Button and enter Host
Name, MAC Address and IP Address.
Note: The MAC address needs to be
entered in the format xx:xx:xx:xx:xx:
xx. You do not need to enter a MAC ad-
dress.
YML754Rev1
www.netcomm.com.au