Introduction To The Projector; Congratulations On Your Purchase Of The Projector; Features You'll Enjoy - NEC NP1200 User Manual

 Introduction to the Projector

This section introduces you to the NP3200/NP2200/NP1200 projector and describes key features and controls.

Congratulations on Your Purchase of the Projector

The NP3200/NP2200/NP1200 is a sophisticated XGA projector that produces an enhanced display. With the
NP3200/NP2200/NP1200 you will be able to project images up to 500" (measured diagonally). Enjoy crisp and
sharp large screen display from your PC or Macintosh computer, DVD player, VCR, satellite hookup, HDTV source.
The NP3200/NP2200/NP1200 provides for enhanced security options to help deter projector theft and provides for
projector control through the PC control port (D-Sub 9 Pin) and LAN support. With input and output flexibility, long
lamp life and a full function remote, the NP3200/NP2200/NP1200 lets you enjoy larger than life viewing from a com-
pact and easy to setup and use projector.

Features you'll enjoy :

• LCD projector with high resolution and high brightness
High resolution display - up to UXGA compatible, XGA native resolution.
• Extensive optional lens
One standard lens and five types of optional lenses are available
• Lens shift mechanism offers installation flexibility
Manual lens shift that can be adjusted by turning dials on the top of the projector
• Quick start & Quick Power Off
Five seconds* after turning on the power, the projector is ready to display PC or video images.
* The quick start time is only when [STANDBY MODE] is set to [NORMAL] in the on-screen message. The pro-
jector can be put away immediately after the projector is powered down.
• Direct Power Off
The projector has a feature called "Direct Power Off". This feature allows the projector to be turned off (even
when projecting an image) by using the Main Power Switch or disconnecting the AC power supply.
To turn off the AC power supply when the projector is powered on, use a power strip equipped with a switch and
a breaker.
NOTE: Before using Direct Power Off, be sure to allow at least 20 minutes immediately after turning on the projector and
starting to display an image.
• Auto Power On, and Auto Power Off functions
The AUTO POWER ON(AC), AUTO POWER ON(COMP1/2), AUTO POWER OFF, and OFF TIMER features
eliminate the need to always use the POWER button on the remote control or projector cabinet.
• Less than 1W in standby condition with energy saving technology
Selecting [POWER-SAVING] for [STANDBY MODE] from the menu can put the projector in power-saving mode
that consumes only 0.4W (100-130V AC)/0.5W (200-240V AC).
• Carbon Meter
This feature will show energy-saving effect in terms of CO
MODE] is set to [ON].
The amount of CO
and in the INFO of the on-screen menu.
• Integrated RJ-45 connector for wired networking capability
An RJ-45 connector is equipped as standard feature.
• The projector can be controlled from a computer over a LAN
Connecting the projector to a network allows the Alert Mail setting and the projector control from a computer via
the network.
To do so, you must have an exclusive application "PC Control Utility Pro4" installed on your computer from the
supplied NEC Projector CD-ROM.
emission reduction will be displayed in the confirmation message at the time of power-off
2
emission reduction (kg) when the projector's [ECO
2
2
1. Introduction