❷ Introduction To The Projector; Congratulations On Your Purchase Of The Projector; General; Light Source · Brightness - NEC PH1202HL1 User Manual

Hide thumbs Also See for PH1202HL1:
Table of Contents

Advertisement

❷ Introduction to the Projector
This section introduces you to your new projector and describes the features and controls.

Congratulations on Your Purchase of the Projector

This projector is one of the very best projectors available today. The projector enables you to project precise images
up to 500 inches across (measured diagonally) from your PC or Mac computer (desktop or notebook), VCR, Blu-ray
player, or document camera.
You can use the projector on a tabletop or cart, you can use the projector to project images from behind the screen,
and the projector can be permanently mounted on a ceiling*
*
Do not attempt to mount the projector on a ceiling yourself.
1
The projector must be installed by qualified technicians in order to ensure proper operation and reduce the risk
of bodily injury.
In addition, the ceiling must be strong enough to support the projector and the installation must be in accordance
with any local building codes. Please consult your dealer for more information.

General

Three-chips DLP projector with high resolution and high brightness
Realized to project the image in the resolution 1920 × 1080 pixels (Full HD), the aspect ratio in 16:9, and the
brightness in 12000 lm. Able to project Full HD image in Native resolution.
Superior dust-proof structure
Adapted the cycle cooling system for cooling down the optical parts. By this system, air in the light source is cooled
down and circulated. As the result, the optical parts are not exposed to the open air and enable to keep brightness
without contamination by dust.
*
Can not prevent contamination by dust completely.
Light source · Brightness
A long-life laser diode is equipped in the light module
The product can be operated at low cost because the laser light source can be used for a long time without requir-
ing replacement or maintenance.
Moreover, if the light module life optimizing [LONG LIFE] mode is selected, light module life can be extended.
Brightness can be adjusted within a wide range
Unlike with ordinary light sources, the brightness can be adjusted from 30 to 100% in 1% increments.
[CONSTANT BRIGHTNESS] mode
Brightness normally decreases with use, but by selecting [CONSTANT BRIGHTNESS] mode, sensors inside the
projector detect and automatically adjust the output, thereby maintaining constant brightness throughout the life
of the light module.
However, if brightness output is set at the maximum, brightness will decrease with use.

Installation

Wide range of optional lenses selectable according to the place of installation
This projector supports 4 types of optional lenses, providing a selection of lenses adapted to a variety of places
of installation and projection methods. No lens is mounted at shipping from the factory. Contact your dealer for
purchasing and replacing these optional lenses sold separately.
Tilt-free, portrait projection
This projector can be set to any angle within a vertical 360° range.
It can also rotate the picture 90° into portrait orientation, however, it cannot be installed with right or left slant
besides the portrait projection.
Power lens control for quick and easy adjustment
By using buttons on the projector or the remote control, zoom, focus, and position (lens shift) can be adjusted.
. The remote control can be used wirelessly.
1
2
1. Introduction

Advertisement

Table of Contents
loading

Table of Contents