Changing Eco Mode - NEC NP1200 User Manual

 Changing Eco Mode

This feature enables you to select two brightness modes of the lamp:
OFF and ON modes. The lamp life can be extended by turning on the [ECO MODE].
[ECO MODE] Description
[OFF] This is the default setting (100% Brightness).
[ON] Select this mode to increase the lamp life (approx.
80% Brightness on NP3200 and approx. 88%
Brightness on NP2200/NP1200).
To turn on the [ECO MODE], do the following:
1. Press the ECO MODE button on the remote control to display
[ECO MODE] screen.
2. Use the  or  button to select [ON].
3. Press the ENTER button.
To change from [ON] to [OFF], Go back to Step 2 and select [OFF].
Repeat Step 3.
NOTE:
• The [ECO MODE] can be changed by using the menu.
Select [SETUP] → [GENERAL] → [ECO MODE].
• The lamp life remaining and lamp hours used can be checked in [USAGE
TIME]. Select [INFO.] → [USAGE TIME].
• [ECO MODE] is always set to [OFF] for 1 minute immediately after the lamp is
turned on. The lamp condition will not be affected even when [ECO MODE] is
changed.
• After a lapse of 1 minute from when the projector displays a blue, black or
logo screen, [ECO MODE] will automatically switch to [ON].
• If the projector is overheated in [OFF] mode, there may be a case where the
[ECO MODE] automatically changes to [ON] mode to protect the projector.
When the projector is in [ON] mode, the picture brightness decreases. When
the projector comes back to normal temperature, the [ECO MODE] returns to
[OFF] mode.
Thermometer symbol [
[ON] mode because the internal temperature is too high.
] indicates the [ECO MODE] is automatically set to
Status of LAMP indicator
Off
Steady Green light
33
4. Convenient Features
LAMP
STATUS
LAMP
POWER
ON OFF
AUTO ADJ.
STATUS
COMPUTER
1 2 3
VIDEO S-VIDEO VIEWER
4 5 6
7 8 9
ID SET 0 CLEAR
AV-MUTE FREEZE
MENU EXIT
ENTER
L - R -
CLICK CLICK
MOUSE
ECO MODEKEYSTONEPICTURE
VOL.
HELP FOCUS ASPECT
ZOOM