Connecting Your Dvd Player With Component Output - NEC NP1200 User Manual

Connecting Your DVD Player with Component Output

Audio Equipment
Stereo mini plug - to - RCA
audio cable (not supplied)
TIP: A component signal will be automatically displayed. If not, from the menu, select [SETUP] → [OPTIONS(1)] → [SIGNAL SE-
LECT] → [COMPUTER 1 (or 2)] → [COMPONENT]. ( → page 71)
• When connecting to the COMPUTER 2 IN, use a commercially available RCA (female)-to-BNC(male) adapter.
NOTE: Refer to your DVD player's owner's manual for more information about your DVD player's video output requirements.
• Select the source name for its appropriate input connector after turning on the projector.
Input connector
COMPUTER 1 IN
COMPUTER 2 IN
COMPUTER 1 IN
AUDIO IN
L R
SOURCE button on the projector
cabinet
COMPUTER 1
COMPUTER 2
2. Installation and Connections
AUDIO IN
15-pin - to - RCA (female) × 3
cable adapter (ADP-CV1E)
DVD player
L R Y Cb Cr
AUDIO OUT Component
Button on the remote control
17
Component video RCA × 3
cable (not supplied)
(COMPUTER 1)
(COMPUTER 2)