Configuring Your Modems For Your Country - Multitech ISI9234PCIE User Manual

Configuring your Modems for your Country

Different countries have different requirements for how modems must function. Therefore, before you use the
modems in your ISI Card, you must configure them to match the defaults of the country in which you are using
them. Use the Global Wizard to configure each modem as described below. The Global Wizard configuration utility
works with computers running Windows 2000/2003/XP/Vista/2008.
1. Insert the ISI product CD into the CD-ROM drive. The main splash screen appears.
2. Click Initial Setup & Country Sel.
3. The Global Wizard page appears. You can select to run the Global Wizard from the CD or install it on your
hard drive. Click on the Install or Run button.
4. The Global Wizard dialog box appears. Click Next.
5. The Global Wizard searches for your modems and identifies them. Click Next. Select a modem to
configure. Click Next.
6. Select the country in which the modem will be used, and then click Next.
7. Review your choice of country. If it is correct, click Next to configure the modem.
8. When Global Wizard announces that the parameters have been set, click Finish to exit.
9. Repeat steps 4 through 8 for each modem on the ISI Card.
Chapter 3 – Software Installation
37