Delete Com Ports - Multitech ISI9234PCIE User Manual
Intelligent serial interface server cards
Hide thumbs
Also See for ISI9234PCIE:
- At commands reference manual (66 pages) ,
- Command reference manual (65 pages) ,
- User manual (22 pages)
Table of Contents
Advertisement
4. At the Confirm Device Removal screen, click OK.
5. Repeat steps 4 and 5 for each additional modem driver to be removed.
Delete COM Ports.
1.
Go to Control Panel I System. Go to the Hardware tab and click on Device Manager. The Device
Manager list will appear.
2. Click on Ports (COM & LPT) to expand the list.
3. Select one of the COM ports being used with the ISI Card. These are designated as "MultiTech
Communications Port (COMx)" where x is usually 3 or greater.
Chapter 3 – Software Installation
19
Advertisement
Table of Contents
Need help?
Do you have a question about the ISI9234PCIE and is the answer not in the manual?