Crosswater 15-15-175-T Installation Instructions

Darby pressure-balance shower set trim

Advertisement

Darby Pressure-balance Shower Set Trim
15-15-T
15-15-175-T
Installation Instructions
Adjustable Wrench
For ease of installation you will need:
To read the installation instructions completely before beginning.
To read all warnings, care, and maintenance information.
To complete the valve rough-in prior to installing this trim kit.
Tools You Will Need
Adjustable Pliers
Hacksaw
Teflon Tape
Before beginning installation, check for any
damage that may have occurred during transport.
Note: Damage claims cannot be made during
or after installation.
Screwdriver
15123045

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 15-15-175-T and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Crosswater 15-15-175-T

  • Page 1 Darby Pressure-balance Shower Set Trim 15-15-T 15-15-175-T Installation Instructions Tools You Will Need Adjustable Wrench Hacksaw Screwdriver Adjustable Pliers Teflon Tape Before beginning installation, check for any For ease of installation you will need: damage that may have occurred during transport.
  • Page 2: Installation Instructions

    15-15-T 15-15-175-T Installation Instructions If h Set the handle in the desired off position and place,the handle assembly on the valve and rotate clockwise securing the handle assembly and escutcheon to the wall and engaging the stem. - If all functions smoothly go to step #15.
  • Page 3 If handle assembly will not secure escutcheon to the wall, measure and note the distance ‘XX’(the Cut stem and nipple the amount distance between the bottom of Remove the handle and escutcheon noted in step # 10. (Never cut the the handle assembly and the assembly, the plate, stem and nipple.
  • Page 4: Cleaning Instructions

    Cleaning Instructions Rinse away any traces of soap and gently dry with a clean, soft cloth after each use. Rinse completely with water and dry any overspray. This will maintain the finish and avoid water spotting. To remove mineral deposits, use a 50/50 solution of white vinegar and water. Do not allow the solution to soak on the product.
  • Page 5: Installation Dimensions

    -1/4" - 3-1/4" with extensions) Warranty - This Crosswater London product is covered by a limited lifetime warranty. For full details, terms and conditions please visit our website. For further information contact: Crosswater London, 393 Fortune Blvd., Milford, MA 01757 www.crosswaterlondon.com...

This manual is also suitable for:

15-15-t

Table of Contents