Crosswater Berea 11-02-T Installation Instructions

Deck tub faucet trim

Download this manual

Berea Deck Tub Faucet

Trim 11-02-T

Installation Instructions

For ease of installation you will need:

To read the installation instructions completely before beginning.

To read all warnings, care, and maintenance information.

Anti-scald protection is the responsibility of the installer and

according to applicable codes.

Before beginning installation, check for any damage

that may have occurred during transport.

Note: Damage claims cannot be made during or

after installation.

15121412-A

Need help?

Do you have a question about the Berea 11-02-T and is the answer not in the manual?

Page 1 Berea Deck Tub Faucet Trim 11-02-T Installation Instructions Before beginning installation, check for any damage For ease of installation you will need: that may have occurred during transport. To read the installation instructions completely before beginning. Note: Damage claims cannot be made during or To read all warnings, care, and maintenance information.
Page 2 11-02-T Installation Instructions Place the spout washer under the Place the “O” ring over the cold valve. spout and install spout on spout Align the handle and place the handle nipple assembly. Be sure the spout is and escutcheon assembly into the Remove the mud guards from the firmly resting on the deck and secure valve.
Page 3 11-02-T Cleaning Instructions Rinse away any traces of soap and gently dry with a clean, soft cloth after each use. Rinse completely with water and dry any overspray. This will maintain the finish and avoid water spotting. To remove mineral deposits, use a 50/50 solution of white vinegar and water. Do not allow the solution to soak on the product.
Page 4 3/4 -14 NPT 1" - 1-1/2" Warranty - This Crosswater London product is covered by a limited lifetime warranty. For full details, terms and conditions please visit our website. For further information contact: Crosswater London, 393 Fortune Blvd., Milford, MA 01757 www.crosswaterlondon.com...