Table 7: Guidance and Manufacturer's Declaration – Electromagnetic Immunity
Frequency ranges and test conditions for RF wireless communications equipment
Frequency band (MHz)
380-390
430-470
704-787
800-960
1700-1990
2400-2570
5100-5800
a
Pulse Modulation is defined as a square wave input with a 50% duty cycle at the listed frequency.
Recommended Separation Distances
6.4.3
The Fluent Pro Fluid Management System is intended for use in an electromagnetic environment in which radiated RF
disturbances are controlled. The customer or the user of the Fluent Pro Fluid Management System can help prevent
electromagnetic interference by maintaining a minimum distance between portable and mobile RF communications
equipment (transmitters) and the Fluent Pro Fluid Management System as recommended below, according to maximum
output power of the communications equipment.
The following table lists the recommended separation distances between portable and mobile RF communications
equipment and the Fluent Pro Fluid Management System.
Table 8: Recommended Separation Distances
Rated maximum output
power of transmitter [W]
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in meters (m)
can be estimated by using the equation applicable to the frequency of the transmitter, where P is the maximum output
power rating of the transmitter in watts [W] according to the transmitter manufacturer.
English
Fluent Pro Fluid Management System
Test frequency (MHz)
380-390
450
710
745
780
810
870
930
1720
1845
1970
2450
5240
5500
5785
Separation distance according to frequency of transmitter [m]
150 kHz to 80 MHz d
= 1.2√P
0.12
0.38
1.2
3.8
12
Supplementary Information
Modulation
a
Pulse – 18 Hz
FM ±5 kHz deviation 1 kHz sine
Pulse – 217 Hz
Pulse – 18 Hz
Pulse – 217 Hz
Pulse – 217 Hz
Pulse – 217 Hz
80 MHz to 800 MHz d
= 1.2√P
0.12
0.38
1.2
3.8
12
Compliance level (V/m)
27
28
9
28
28
28
9
800 MHz to 2.7 GHz d
= 2.3√P
0.23
0.73
2.3
7.3
23
79
Need help?
Do you have a question about the Fluent Pro and is the answer not in the manual?
Questions and answers