Kanguru Defender Bio-Elite30 User Manual page 23

To manage fingerprints, click on the circle located over a finger to select a fingerprint to manage. A dot
will appear within the center of the circle to signal that it is selected.
If you are enrolling a new fingerprint:
1. Configure the permissions granted when logging in with this fingerprint.
○ Manage fingerprint registration - When checked, logging in with this fingerprint will allow
you to manage fingerprints registered with the device.
○ Login with Write Protection - When checked, logging in with this fingerprint will allow
access to the secure storage partition with read-only permissions. .
2. Click the Enroll button to start scanning your fingerprint.
3. Use the selected finger to tap the scanner located on the back of the drive repeatedly until you see
a green, fingerprint image start to appear.
4. Once the fingerprint image is fully formed, a window will appear notifying you that fingerprint
registration was successful. Click oK to continue.
If there is more than one fingerprint currently registered, you can delete a registered fingerprint by
selecting the circle above the registered finger and then clicking the Delete button.
23
The Command Console