First Time Setup - Kanguru Defender Bio-Elite30 User Manual

2. first time setup

While the Defender Bio-Elite30 can be configured for use with any operating system, the initial setup
requires running the KDMBio application on a Mac or Windows based computer.
To configure your Defender Bio-Elite 30 for use:
1. Insert your Defender Bio-Elite30 device into an available USB port.
2. Locate and open the Defender Bio-Elite30 DVD-RW drive and then run the KDMBio application.
3. The Welcome Screen appears asking you to choose how you want the device to behave:
○ autoscan Enabled - When the box is checked, the device will run in Autoscan mode. KDMBio
only needs to be run once on a supported Windows PC or Mac to register at least one fingerprint.
Afterwards, you will be able to access the secure storage partition using only a fingerprint scan.
You will only need to run KDMBio to configure or manage AV, KRMC, SSPM, or fingerprints.
○ autoscan Disabled - When the box is unchecked, the device is running in standard mode. You
will be required to run KDMBio to access the secure storage partition. Since KDMBio is always
needed in this configuration, the drive will only work on a supported Windows PC or Mac. This
is typically only recommended for devices managed using KRMC.
Click on the Next button to continue setting up your Defender Bio-Elite30.
5
First Time Setup