Power - MSI MS-9282 User Manual

M S-9282 ServerB

Power

Use this menu to specify your settings for Power Management. Remember that the
options available depend upon the hardware installed in your system.
Power Loss Control
This setting specifies whether your system will reboot after a power failure or
interrupt occurs. Available settings are:
[Stay Off]
[Power On]
[Last State]
C State Configuration
C-state performance indicates the ability to run the processor in lower power states
when the PC is idle. This setting enables/disables the C-State Configuration for
power saving purposes.
Enable M ultimedia Timer
This setting enables the Multimedia Timer to achieve better resolution for multimedia
and other time-sensitive applications.
Wake Up by LAN
Select [Enabled] to wake up the system when incoming signals are detected on the
specified LAN devices.
3-22
Returns the system to an off state.
Returns the system to an on state.
Restores the system to the previous status before power
failure or interrupt occurred.