Serial Ata Connectors: Sata_0 ~ Sata_3; Serial Attached Scsi Connectors: Sas_0 ~ Sas_3 - MSI MS-9282 User Manual

M S-9282 Server

Serial ATA Connectors: SATA_0 ~ SATA_3

SATA_0 ~ SATA_3 are high-speed SATA II interface ports and support SATA II data
rates of 300MB/s. Each SATA II connector can connect to 1 hard disk device and is
fully compliant with Serial ATA 2.0 specifications.

Serial Attached SCSI Connectors: SAS_0 ~ SAS_3

The SAS connector is a new generation serial communication protocol for devices
designed to allow for much higher speed data transfers. It supports data transfer
speeds up to 3 Gbit/s. SAS uses serial communication instead of the parallel method
found in traditional SCSI devices but still uses SCSI commands for interacting with
SAS devices. Each SAS connector can connect to 1 disk drive.
Important
Please do not fold the SATA/SAS accessory cable into 90-degree angle.
Otherwise, data loss may occur during transmission.
2-8
SATA_0 SATA_1
SAS_0 SAS_1
SATA_3
SATA_2
SAS_2
SAS_3