Entering Setup - MSI MS-9282 User Manual

M S-9282 ServerB

Entering Setup

Power on the computer and the system will start POST (Power On Self Test) process.
W hen the message below appears on the screen, press <F2> key to enter Setup.
If the message disappears before you respond and you still wish to enter Setup,
restart the system by turning it OFF and On. You may also restart the system by
simultaneously pressing <Ctrl>, <Alt>, and <Delete> keys.
Important
1. The items under each BIOS category described in this chapter are under
continuous update for better system performance. Therefore, the descrip-
tion may be slightly different from the latest BIOS and should be held for
reference only.
2. Upon boot-up, the 1st line appearing after the memory count is the BIOS
version. It is usually in the format:
1st digit refers to BIOS maker as A = AMI, W = AWARD, and P =
PHOENIX.
2nd - 5th digit refers to the model number.
6th digit refers to the chipset as I = Intel, N = nVidia, V = VIA, and R =
Serverworks.
7th - 8th digit refers to the customer as MS = all standard customers.
V1.0 refers to the BIOS version.
101506 refers to the date this BIOS was released.
3-2
Press F2 to enter SETUP
P9282NMS V1.0 101506 where: