Scanning Documents; Using Scanwizard Di; Scanning A Single-Sheet Document - Microtek XT6060 User Manual

Scanning Documents

Using ScanWizard DI

ScanWizard DI is a scanning software designed by Microtek for document
scanning in color, black and white, and grayscale. Its user-friendly interface
enables you to easily start the scanning process. Refer to the ScanWizard DI
software manual for more details.
The following sections will show you step by step how to use ScanWizard DI.

Scanning a Single-sheet Document

1. Place the single-sheet document to be scanned on the scanner glass surface.
2. Launch ScanWizard DI (either as a stand-alone by clicking the program icon,
3. Specify your scanning requirements in the ScanWizard DI control panel.
4. Click the Preview button to perform a preliminary view of the entire image.
5. Click the Scan Frame tool button to adjust the size of the scan frame
16 XT6060 User's Manual
or by using the "File-Import" or "Scan" command from an application
program).
a) Select Flatbed as your image input device in the Scan Source drop-down
menu.
b) Select your image output type in the Scan Type drop-down menu.
– Select RGB Color (24 bits) to scan the image in color.
– Select Grayscale (8 bits) to scan the image in grayscale.
– Select Black & White (1 bit) to scan the image in black-and-white.
c) Select a dimension in the Paper Size drop-down menu as your preview
image size.
d) Select your desired image output resolution in the Resolution
drop-down menu.
e) If the Auto-crop & Auto deskew option is selected, the scanner
automatically detects the size of the original image, crops the full scan
frame to fit the image, and removes unwanted black borders after the
scan, as well as corrects the distorted image for proper alignment.
When done, a preview image appears in the preview window.
(enclosed within the red dotted lines and labeled with the tag "Main"). Drag
on the edge or corner of the scan frame to resize the scan frame.