MSI MS-7173 User Manual page 51

MS-7173 M-ATX Mainboard
Parallel Port
This specifies the I/O port address and IRQ of the onboard parallel port.
Parallel Port M ode
[SPP] : Standard Parallel Port
[EPP] : Enhanced Parallel Port
[ECP] : Extended Capability Port
[ECP + EPP]: Extended Capability Port + Enhanced Parallel Port
[Normal]
SPP/EPP/ECP/ECP+EPP
To operate the onboard parallel port as Standard Parallel Port only, choose
[SPP]. To operate the onboard parallel port in the EPP mode simultaneously,
choose [EPP]. By choosing [ECP], the onboard parallel port will operate in
ECP mode only. Choosing [ECP + EPP] will allow the onboard parallel port to
support both the ECP and EPP modes simultaneously. Choose [Normal] to
use Standard Parallel Port + Bi-Directional Mode simultaneously.
SATA Device Configuration
Press <Enter> to enter the sub-menu and the following screen appears:
OnChip SATA Channel
This setting controls the onchip SATA channel (SATA & PATA).
OnChip SATA Type
This setting specifies the operation mode of SATA devices.
3-14