IDE Device Configuration
Press <Enter> to enter the sub-menu and the following screen appears:
On-Chip IDE Controller
The integrated peripheral controller contains an IDE interface with support for
two IDE channels. Select [Disabled] to disable the integrated IDE controller,
[Primary] to enable only the primary IDE controller, [Secondary] to enable only
the secondary IDE controller, or [Both] to enable both IDE controllers. Setting
options: [Disabled], [Primary], [Secondary], [Both].
PCI IDE BusM aster
Set this option to [Enabled] to specify that the IDE controller on the PCI local bus
has bus mastering capability. Settings options: [Disabled], [Enabled].
I/O Device Configuration
Press <Enter> to enter the sub-menu and the following screen appears:
COM Port 1
Select an address and corresponding interrupt for Serial Port 1. The settings
are: [3F8/IRQ4], [2E8/IRQ3], [3E8/IRQ4], [2F8/IRQ3], [Disabled], [Auto].
BIOS Setup
3-13