Troubleshooting - Wouxun KG-UV8D Plus Manual

Troubleshooting
Professional FM Transceiver
Before assuming your transceiver is broken, please check your transceiver according to the following
table; if the problem problem persists, you can reset the transceiver, which sometimes. Fault Solution
> Check that the volume knob has been set to maximum.
Can not enter scanning
4 » Please see if the scan group channel, Scan Add function is turned on.
mode
Cannot set up the cross- » Please make sure А/В area is on the cross-band repeaters operating
Reception prompt remains | % Please reset CTCSS/DCS to check whether different channels
>» Check whether mute settings are correct. Cannot transmit in repeat | >> Please check to see if the receivers squelch and CTCSS / DCS settings
mode are correct.
» Check whether keypad has been locked.
>» Check whether other keys have been pressed.
Keypad is unresponsive
Other voices (not from
group members) appear » Please change the CTCSS / DCS code.
in the channel.
In standby, automatic
transmission without » Please check if VOX function is active or VOX level is too low.
pressing PTT key