Scan Mode (Sc-Rev) - Wouxun KG-UV8D Plus Manual

Shortcut Operation Sheet
47 Repeater
Receipt Tone (=> CB => >
48 Saving
Scan Mode 10 => CEB > CI >
49 Setting
Sub-Frequency EB =>
Mute
50 Selective
Call Code
Group Setting
51 Reset
Setting
+a
a> Qm
52 Setting
for Backlight
л - ga 628
53 Radio-WR (C9 => CRI =» СТИВ > | :
55 Compander Со» 619 qu
18
> (2
EDERT >
>ш»
тез emor каје
(Select parameter
TII
Select parameter
кез ake)
(Select parameter
тез
elect parameter
ON: Activate
OFF; Deactivate
[m
DEC: Save ЯХ CTCSS/DCS
NEC Save TK CTCSS/0CS
TX: Deactive volume on sub-frequ.
елеу when transmitting оп master
frequency
RX: Deactive volume on sub-frequ-
елеу when receiving on master
frequency
roup't-20
ve both RX and TX C T C S S / D C S
i^m 0°
=сеямеєе "
%
СОМРАМРЕ
> ие»
>ш ше»
>ш е»
cm
-(Ш--
Безезсвзгеу
Select parameter
Presses кау
Select parameter
ess B01 Caley
(Select parameter
ess тог a key)
elect paramete
тез тэ oF EA key!
elect parameter
meters
ALL: Reset all (menu & channel)
functional paramenters
Backlight: O1 to 10 groups
Read Radio S t a t i o n : 0 1 - 2 0 Groups
Write Radio Station: 01-20 Groups
Scrambler: 1-8 groups
OFF: Turn off
ON: Tum on
OFF: Tum off
УРО: Reset menu functional para- |
со ED»
„Сз. (27) oo
С ғ.
>@ (5^
ЕС...
-C5- (5^
-UC5- (5^
-C9- (2^
How to Operate
(Фшоихип
Professional FM Transceiver
Step Frequency (STEP) ----- MENU 1
In standby, press + Э , the screen displays
Press to enter, press У / 62 to select the desired step, then press @ to confirm, finally press
GB to return to standby.
The frequency steps selectable for this transceiver are as follows:
5.00KHz, 6.25KHz, 10.00KHz, 12.50KHz, 25.00KHz, 50.00KHz and 100KHz.
Squelch Level (SQL-LE) MENU 2
Squelch level is about when the signal is strong enough to turn on the squelch function, and when it is
weak enough to turn off. You may hear the voice from the loudspeaker when turning ON the squelch and
receiving the same signal from other transceivers. Higher level makes it harder to receive the weak signals,
while lower level will be interfered by noises and/or unwanted signals.
In standby, press + 83, the screen displays
Press (GQ to enter, press ЄЗ / ЄЗ to select the desired squelch level, then press to confirm,
finally press @ to return to standby.
19