Repeater Speaker (Rpt-Spk); Menu 42 - Wouxun KG-UV8D Plus Manual

How to Operate
Repeater Speaker (RPT-SPK) --- MENU 38
In standby, press - Є GD , the screen display
Press to access, press 79 / 62 to select ON/OFF. And then press (о confirm, and press Со
return to standby.
Repeater PTT (RPT-PTT) --- MENU 39
In standby, press ŒD + э
Press о access, press (У / 62 to select ON/OFF. And then press (о confirm, and press Eto
return to standby.
the screen display
Scan Add (SCAN-ADD) --- MENU 40
This function means whether a channel in scanning when in the startup channel scanning, so the funct-
ion can be set only in the channel mode under the current ch
In standby, press + GB ED. the screen display
Press (о access, press 79 / ED to select ON/OFF And then press ўїо confirm, and press @ to
return to standby.
nel, is invalid in frequency mode.
Note:The function is invalid in cross-band repeater or repeater/transmitter mode.
46
Professional FM Transceiver
Single-Tone Pulse Frequency (ALERT) --- MENU 41
Some of the relay systems used for single-tone pulse transmission need a single-tone pulse signal to ac-
tivate, if a repeater is already active, however, this signal is not needed. The following pulse signal freq-
uencies can be selected: 1750Hz, 2100Hz, 1000Hz and 1450
In standby, press + Є) (0). the screen displays
Press to access, press ФУ /@ Ж to select the parameter you desire and then press {о confirm,
press С to return to standby.
In transmission mode, press PF2 to transmit the selected single-tone pulse frequency.
Caller ID Code Transmitting Delay (PTT- DLY)
15 standby, press + , the screen display
Press to access, press ҒЗ / 62 to select the time you want. And then press о confirm, and
press С to return to standby.
This delay time can be set 100—3000ms, total 30 levels with 100ms each.
MENU 42
Caller ID Transmission Mode (PTT-ID) - - - MENU 43
In standby, press ŒD + GD 620 , the screen display
47