How To Operate - Wouxun KG-UV8D Plus Manual

How to Operate
> The squelch level for this transceiver has 0-9 levels selectable, and level 0 means turn off the squelch function.
The higher level of the squelch is set, the stronger receiving signal is needed.
Power Saver Mode (SAVE) --- MENU 3
When the power saver function is ON, the receiver circuit will be cut off for a moment, and then
re-activate to detect the signals for a while, in order to reduce the battery capacity consumption.
In standby, press Cz + Є , the screen displays
Press to enter, it shows 'ON', press GV / ED to select turn ON/OFF the power saver funtion.
Press to confirm, and then press GM to return to standby.
Transmitting Power Selection (TXP) --- MENU 4
In frequency mode, press + @ , the screen displays
Press to enter, it shows 'HIGH', press ҒӘ / 62 to select HIGH/LOW power, then press to
confirm, finally press ӨЗ to return to standby.
20
(Фшоихип
Professional FM Transceiver
>» This transceiver has HIGH and LOW transmitting power selectable:
VHF: HIGH: 5W LOW:1W
UHF: HIGH: 4W LOW:1W
Transmssion Prompt settings (ROGER) --- Menu 5
When the transceiver is standby,press the + 69 keys and the screen will display: | "о
Press the key to access the menu, and after pressing the 7 / E keys to choose the required prompt
mode, press the key to to confirm, or the key to retum to standby.
The transceiver features 4 kinds of prompt: BOT (beginning of transmission) , EOT (end of transmission) ,
BOTH (beginning and end of transmission), and OFF (prompts deactivated).
Time-out Timer (TOT) --- MENU 6
This transceiver can be set in 60 levels with 15 seconds each, between 15 and 900 seconds.
In standby, press GQ + CI), the screen displays
Press to enter, press 7 / ED to select the desired timer level, then press о to confirm, finally
press GM to return to standby.
21