Auto Backlight (Abr); Offset Frequency (Off-Set); Frequency Shift Direction (Sft-D); Stopwatch Timer (Second) - Wouxun KG-UV8D Plus Manual

How to operate
» The password for the work mode switch is programmed only via the programming software.
» The password is consist of 6 characters, while "000000" means no password needed for the
mode switch.
Auto Backlight (ABR) --- MENU 22
In standby , press ŒD + (Э. the screen display
Рге5 \о enter, press ФУ / ED to select backlight function , then press confirm , press СЭ it
return to standby.
Always Activate
15-205: Set the lasting time of backlight
Offset Frequency (OFF-SET) --- MENU 23
In standby, press and the screen display | с:
Press Но access the menu, press (79 / 62 to select the parameter you desire, and then presss CE)
to confirm, press іо return to standby.
Offset frequency range:0-599.995MHz, The 7th and 8th frequency point depends on the programmed
step frequency.
Frequency Shift Direction (SFT-D) --- MENU 24
@wouxun
Professional FM Transceiver
In standby, press + 63 (6. The screen display
Press ( іо enter, press 79 / 62 to select the desired frequency shift direction, then press Œ con-
firm, press @ it return to standby.
There are three selections for the frequency shift direction setting:
1. Plus shift (+), which means that the transmitting frequency is higher than the receiving frequency.
2. Minus shift (-), which means that the transmitting frequency is lower than the receiving frequency.
3. Turn off this function
>» When offset frequency is out of the allowed offset frequency range, the transceiver can not tra-
nsmit. In this case, please make sure the offset frequency and receiving frequency is within the
allowed range.
Stopwatch Timer (SECOND) --- MENU 25
In standby, press ŒD + Є Є , The screen display
Press (о enter, 79 / ED to select ON/OFF , then press confirm, press ( to standby.
Using the stopwatch timer:
33